2003 Aprilia RX50

Rear Direction indicator insecure (4.4.1 (c) (i))

Rear Suspension arm ball joint worn, but not excessively swing arm (5.3.4 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Direction indicator insecure (4.4.1 (c) (i))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Suspension arm ball joint worn, but not excessively swing arm (5.3.4 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

All direction indicators not working (4.4.1 (a) (ii))

Brake pedal insecure (1.1.2 (e) (i))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Exhaust system insecure (6.1.2 (a))

Headlamp aim not tested (4.1.2 (b))

Headlamp light source and lamp not compatible (4.1.4 (c))

Horn not working (7.7 (a) (ii))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear reflector missing (4.8.2 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Headlamp aim too high (4.1.2 (a))

Headlamp aim too low (4.1.2 (a))

Horn not working (7.7 (a) (ii))

Rear Brake disc contaminated (1.1.14 (b))

Rear Brake pad(s) contaminated (1.1.13 (b))

Rear Lower Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Front Wheel bearing has slight play (5.1.3 (a) (i))

Front brake hose fouling head stock

Rear Tyre worn close to the legal limit (5.2.3 (e))

oil on rear tyre

Headlamp light source and lamp not compatible (4.1.4 (c))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front wheel bearings are slightly rough (2.3.5b)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Lower Rear suspension bush has slight free play shock link (2.4.A2a(i))

Steering movement slightly stiff (2.2.1b)

Horn not loud enough to be heard by another road user (1.7.3a)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Stop lamp does not illuminate immediately a brake applies from brake pedal (1.3.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front wheel bearings are slightly rough (2.3.5b)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Lower Rear suspension bush has slight free play shock link (2.4.A2a(i))

Steering movement slightly stiff (2.2.1b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

front brake slightly binding

Clutch lever positioned so it cannot be readily operated. (6.2.1g)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear wheel bearings have slight free play (2.4.A.2c)

fuel cap breather pipe missing

light switch insecure

no mirrors fitted

Rear Rear position lamp insecure (1.1.1c)

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Front Headlamp aim too high (1.6)

Nearside Inner Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Steering movement slightly 'notchy' (2.2.1a)

Rear Wheel alignment slightly misaligned. (2.5.1)