MOT Status
ExpiredMileage
115,615 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outrigger (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outrigger outside prescribed area (5.3.6 (a) (i))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch subframe mounting (5.3.6 (a) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outrigger (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outrigger outside prescribed area (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg/inner wheel arch area (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg/inner wheel arch area (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive out-rigger (5.3.6 (a) (i))
Offside Front Wheel bearing slightly noisy close to excess (5.1.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
exhaust system in poor condition
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength out-rigger (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg/inner wheel arch area (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive chassis leg/inner wheel arch area (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive out-rigger (5.3.6 (a) (i))
Offside Front Wheel bearing slightly noisy close to excess (5.1.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
exhaust system in poor condition
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))
Brake pedal wearing smooth (1.1.2 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Offside Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength panel (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre out rigger (5.3.6 (a) (i))
Brake pedal wearing smooth (1.1.2 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Direction indicator slightly discoloured (4.4.3 (a))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
exhaust front pipe bolt missing
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Direction indicator incorrect colour (1.4.A.2f)
rear brake application uneven (3.7.B.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
exhaust front pipe bolt missing
Direction indicators slightly discoloured (1.4.A.2f)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Direction indicators slightly discoloured (1.4.A.2f)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Fuel system component leaking (7.2.3)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
nearside front wheel bearing slightly noisey
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front front brake binding (3.7.B.1)
Nearside Rear front brake binding (3.7.B.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front front brake binding (3.7.B.1)
Offside Rear front brake binding (3.7.B.1)
rear brake binding (3.7.B.1)
How Reliable is the Fiat Ducato?
Based on 1,962,737 MOT tests across 142,446 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MX05 HRA is a 2005 Fiat Ducato in White with a 1,997cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2005 Fiat Ducato models, the average MOT pass rate is 74.6% with a typical mileage of 41,565 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Ducato fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 34,174 recorded failures. If you're considering buying MX05 HRA, it's worth having these areas checked by a mechanic before committing.
The Fiat Ducato typically stays on UK roads for around 38 years. At 21 years old, this Fiat Ducato is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of MX05 HRA?
You can check the full history of MX05 HRA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MX05 HRA registered?
MX05 HRA is a 2005 Fiat Ducato, first registered on 1 April 2005.
Is MX05 HRA safe to buy?
The MOT history for MX05 HRA shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MX05 HRA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MX05 HRA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.