MOT Status
ExpiredMileage
92,489 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Front Seat belt retracting mechanism defective (7.1.2 (e))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded holes (6.1.1 (c) (i))
Nearside Rear Anti-roll bar pin or bush excessively worn 'D' bush (5.3.4 (a) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded holes around steering column area (6.1.1 (c) (i))
Offside Rear Anti-roll bar pin or bush excessively worn 'D' bush (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced wheel arch area (6.1.1 (c) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced wheel arch area (6.1.1 (c) (i))
Offside Side repeater slightly discoloured (4.4.3 (a))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement boh sides (5.3.4 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced multiple corroded holes outside of prescribed areas (6.1.1 (c) (i))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides (6.2.2 (d) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced front floor near steering column (6.1.1 (c) (i))
suspension components corroded
Horn not working (7.7 (a))
Nearside Front Body component corroded and likely to cause injury corrosion hole next to floor step within 30cm of seat and seat belt mounting (6.2.1 (a) (i))
Nearside Outer Outline marker lamp not working (4.2.1 (a) (ii))
Nearside Side repeater incorrect colour (4.4.3 (a))
Offside Front Body component corroded and likely to cause injury corrosion hole next to floor step within 30cm of seat and seat belt mounting (6.2.1 (a) (i))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Nearside Front Lower Suspension arm corroded but not seriously weakened surface corrosion (5.3.3 (b) (i))
Nearside Front Upper Suspension arm corroded but not seriously weakened surface corrosion (5.3.3 (b) (i))
Nearside Front Upper Suspension arm corroded but not seriously weakened surface corrosion (5.3.3 (b) (i))
Nearside Rear Inner Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch floor (6.2.2 (d) (i))
Offside Front Lower Suspension arm corroded but not seriously weakened surface corrosion (5.3.3 (b) (i))
Offside Rear Inner Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security wheel arch floor (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced from front to rear both sides (6.1.1 (c) (i))
Nearside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Horn not working (7.7 (a))
Nearside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Outline marker lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security arch (6.2.2 (d) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outrigger (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security arch (6.2.2 (d) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outrigger (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Horn not working (7.7 (a))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security arch (6.2.2 (d) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outrigger (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))
Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Lower Side Marker Lights Inoperative
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner arch (6.2.2 (d) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security out rigger (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))
Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Lower Side Marker Lights Inoperative
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner arch (6.2.2 (d) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security out rigger (6.2.2 (d) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Lower side markers not working
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (1.1.21 (e) (i))
Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front rust below battery tray
Nearside Lower side markers not working
Nearside Rear inner wheel arch coroided
Offside Windscreen wiper blade defective (3.4 (b) (i))
Windscreen wiper blade defective (3.4 (b) (i))
Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Windscreen wiper not working (3.4 (a))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
All standard equipment guards fitted at time of test not allowing full inspection
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Suspension arm corroded but not seriously weakened (2.4.G.1)
Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
How Reliable is the Iveco Daily 35S12 LWB?
Based on 17,415 MOT tests across 1,451 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
MX07 WTD is a 2007 Iveco Daily 35S12 LWB in White with a 2,287cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 68.2%.
Across all 2007 Iveco Daily 35S12 LWB models, the average MOT pass rate is 64.0% with a typical mileage of 125,809 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Iveco Daily 35S12 LWB fails its MOT is parking brake: efficiency below requirements, accounting for 1,255 recorded failures. If you're considering buying MX07 WTD, it's worth having these areas checked by a mechanic before committing.
The Iveco Daily 35S12 LWB typically stays on UK roads for around 22 years. At 19 years old, this Iveco Daily 35S12 LWB is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of MX07 WTD?
You can check the full history of MX07 WTD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was MX07 WTD registered?
MX07 WTD is a 2007 Iveco Daily 35S12 LWB, first registered on 2 July 2007.
Is MX07 WTD safe to buy?
The MOT history for MX07 WTD shows 22 tests with a 68.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does MX07 WTD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on MX07 WTD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.