2015 Peugeot 208

Emissions unable to be completed em lamp indicates a fault (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake disc worn, pitted or scored, but not seriously weakened both front discs (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush is split (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases clamp (6.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush is split (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases clamp (6.1.2 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust mounting defective all hangers are cracked and system is rusty (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush in a poor condition (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge outer edge smooth no cords visible (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge both edges worn tread is 2.7mm (5.2.3 (e))

rear undertray fitted not allowing full inspection of component's

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust mounting defective all hangers are cracked and system is rusty (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush in a poor condition (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge outer edge smooth no cords visible (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge both edges worn tread is 2.7mm (5.2.3 (e))

rear undertray fitted not allowing full inspection of component's

Nearside Front Outer Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Drive belt worn, but not excessively (6.1.7 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)