2005 Honda CG125

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))

Stop lamp remains on when the brakes are released Front brake lever sticking. (4.3.2 (a) (iii))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot rear brake pedal has free play (1.1.1 (b))

Front Headlamp aim too low headlight aim too low (4.1.2 (a))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot rear brake pedal has free play (1.1.1 (b))

Chain guard missing ()

Front Brake binding but not excessively (1.2.1 (f))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Chain guard missing ()

Front Brake binding but not excessively (1.2.1 (f))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

split pin missing from rear torque arm bolt

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front suspension has a slightly reduced damping effect (2.3.6c)

Brake pedal is positioned so that the brake cannot be readily applied (3.1.3c)

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)