2009 Volvo V50

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Rear Wishbone bush deteriorated (5.3.4 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Rear Wishbone bush deteriorated (5.3.4 (a) (i))

Exhaust mounting defective Front flex (6.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Offside Rear Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Exhaust mounting defective Front flex (6.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Front Exhaust mounting defective (6.1.2 (a))

Offside Rear Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Oil leaking excessively from engine (8.4.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Front Suspension arm pin or bush worn but not resulting in excessive movement Both front rear bush's (5.3.4 (a) (i))

Tyre worn close to legal limit/worn on edge Both front worn on inner edge (5.2.3 (e))

Nearside Front Position lamp not working (4.2.1 (a))

Front exhaust mount broken, system still supported.

Tyre worn close to the legal limit Both front and O/S/F Tyres worn on inner edge (4.1.E.1)

Front exhaust mount broken, System still supported.

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Front exhaust mount broken, System still supported.

Nearside Front Tyre worn close to the legal limit on 2mm & wear on edges (4.1.E.1)

Offside Front Tyre worn close to the legal limit on 2mm & wear on edges (4.1.E.1)

Nearside Direction indicator incorrect colour (1.4.A.2f)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside headlamp image poor

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside headlamp image poor

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)