2007 Audi A4

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s) ()

both rear light units loose

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Play in steering rack inner joint(s) ()

both rear light units loose

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front both top suspension wishbone bushes are slitting

Offside Front both top suspension wishbone bushes are slitting

anti slip warning light was illuminated before test was started before the test but never came back on

Nearside Front both top suspension wishbone bushes are slitting

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front both top suspension wishbone bushes are slitting

anti slip warning light was illuminated before test was started before the test but never came back on

Nearside Front Inner Suspension arm rubber mounting deteriorated but not resulting in excessive movement wishbone bush (2.4.G.2)

Nearside Front tyre cuts in outer sidewall but not to cords

Nearside Rear Rear position lamp(s) has a product on the lens but not adversely affecting light output condensation (1.1.A.3d)

Offside Front Inner Suspension arm rubber mounting deteriorated but not resulting in excessive movement wishbone bush (2.4.G.2)

Nearside Rear Inner Tyre has a tear, caused by separation or partial failure of its structure sidewall (4.1.D.1b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Inner Suspension arm rubber mounting deteriorated but not resulting in excessive movement wishbone bush (2.4.G.2)

Nearside Front tyre cuts in outer sidewall but not to cords

Nearside Rear Rear position lamp(s) has a product on the lens but not adversely affecting light output condensation (1.1.A.3d)

Offside Front Inner Suspension arm rubber mounting deteriorated but not resulting in excessive movement wishbone bush (2.4.G.2)

Nearside Front Inner Suspension arm rubber mounting deteriorated but not resulting in excessive movement wish bone (2.4.G.2)

cut in nearside front and nearside rear sidewalls but not to cords

e.m.l light on

engine covers and undertrays fitted not allowing inspection of components underneath

slight corrosion on exhaust

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

cuts in sidewalls of both front tyres and nearside rear tyre but not to cords

engine light on

flat spots on inner edge of offside rear tyre 235/40z18

Front registration plate insecure (6.3.1b)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

cuts in sidewalls of both front tyres and nearside rear tyre but not to cords

engine light on

flat spots on inner edge of offside rear tyre 235/40z18

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Offside rear tyre out of shape

Under-trays fitted obscuring some underside components

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Engine covers fitted obscuring some components in the engine bay

Items removed from driver's view prior to test

Offside rear tyre out of shape

Under-trays fitted obscuring some underside components

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Stop lamp not working (1.2.1b)

Rear Brake pad(s) wearing thin (3.5.1g)

Registration plate lamp not working (1.1.C.1d)