1996 Ford Transit

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Brake load sensing valve linkage defective and function impaired broken and leaking (1.1.17 (a))

Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive top shocker mounting (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

play in propshaft centre bearing

Front Registration plate inscription illegible (0.1 (b))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Rear Registration plate inscription illegible (0.1 (b))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake load sensing valve linkage defective but function not impaired (1.1.17 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced many old repairs covered in heavy underseal (6.1.1 (c) (i))

Nearside Seat belt anchorage prescribed area is inadequately repaired sill (5.2.6)

Offside Front Seat belt anchorage prescribed area is inadequately repaired strut top mounting not fully seam welded (5.2.6)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering chassis (6.1.A.1)

Offside Seat belt anchorage prescribed area is inadequately repaired sill (5.2.6)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Play in propshaft centre bearing ()

nearside and offside under sill middle and rear has been fibreglassed (panneling)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Side repeater not working (1.4.A.2c)

Nearside Stop lamp not working (1.2.1b)

Offside Stop lamp emits other than a steady red light (1.2.1e)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Play in propshaft centre bearing ()

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Upper Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Coolant leak

Offside Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Coolant leak

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

front inner sills are corroded and holed outside of a prescribed area

rear chassis is corroded

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Vehicle structure has slight corrosion (6.1.A.1)

Brakes imbalanced across an axle (3.7.B.5b)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Body has slight corrosion (6.1.B.2)

Front brake disc slightly pitted (3.5.1h)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

rear brake application uneven (3.7.B.2)

Oil leak

All position lamps not working (1.1.A.3b)

Brake load sensing valve linkage seized (3.6.E.3)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Rear Registration plate lamp not working (1.1.5c)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Vehicle structure has slight corrosion (6.1.A.1)