1996 Mercedes-benz Sl

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Coil spring corroded both rear (5.3.1 (b) (i))

both rear jacking points corroded slightly

Windscreen washer not working (3.5 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Coil spring corroded both rear (5.3.1 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis leg by anti roll bar mount (5.3.6 (a) (i))

both rear jacking points corroded slightly

Nearside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Registration plate deteriorated but not likely to be misread faded (0.1 (b))

Fuel cap/sealing device missing (6.1.3 (b) (i))

Nearside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Registration plate deteriorated but not likely to be misread faded (0.1 (b))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Full beam "flash" does not work.

Nearside Rear Inner Body has slight corrosion (6.1.B.2)

Nearside Rear Tyre has very worn walls.

Nearside Drag link end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Full beam "flash" does not work.

Nearside Rear Inner Body has slight corrosion (6.1.B.2)

Nearside Rear Tyre has very worn walls.

Nearside Front small split in edge of tyre rim kerb damaged

Offside Rear nail in tread/punctured/irrepairable

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nail in nearside rear tyre

Offside Front front brake fluctuating, but not excessively (3.7.B.3)

Parking brake lever has little reserve travel (3.1.6b)

Headlamp flasher unit not working

OSR tyre slightly perished

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Parking brake lever has little reserve travel (3.1.6b)

Headlamp flasher unit not working

OSR tyre slightly perished

Offside front brake fluctuating, but not excessively (3.7.B.3)

Parking brake lever has little reserve travel (3.1.6b)

offside front indicator lense is missing

slight play in the nearside front wheel

Body has a sharp edge caused by corrosion (6.1.C.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front registration plate deteriorated (6.3.1d)

Nearside Side repeater incorrect colour (1.4.A.2f)

offside front indicator lense is missing

slight play in the nearside front wheel

front number plate is starting to deteriate

slight play in the nearside front wheel

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Direction indicator incorrect colour (1.4.A.2f)

Offside Side repeater incorrect colour (1.4.A.2f)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake hose ferrule excessively corroded (3.6.B.4e)