1995 Honda Civic

Front bumper insecure

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear bumper insecure

n/s/r light unit cracked

slight corrosion to underside of vehicle

Exhaust noisy (7.1.4)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Exhaust noisy (7.1.4)

nearside front brake grabbing slightly

offside rear tyre pressure is low

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front bumper insecure

Rear bumper insecure

Sill covers fitted

Brake pedal spongy (3.3.B.1b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Suspension arm locating pin locking device missing (2.4.G.3b)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Parking brake lever has no reserve travel (3.1.6b)

Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front bumper insecure

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear bumper insecure

Offside Headlamp aim beam image kick up to the offside (1.8)

Offside Rear fog lamp not working (1.3.2b)

Power steering inoperative (2.3.3a)

Power steering pump leaking from a failed component (2.3.3b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre incorrectly seated on the wheel rim (4.1.D.1d) DANGEROUS

bonnet not locking shut

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too high (1.8)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Registration plate lamp not fitted (1.1.C.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

o/s/f tyre down to 2mm

oil leak