2006 Mazda Bongo

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced central inner sill (6.1.1 (c) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced central inner sill (6.1.1 (c) (i))

Power steering component has slight seepage from a component rack (2.1.5 (a))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced central inner sill (6.1.1 (c) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced central inner sill (6.1.1 (c) (i))

Power steering component has slight seepage from a component rack (2.1.5 (a))

Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wing/wheel arch (5.3.6 (a) (i))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill at rear (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing /wheel arch (5.3.6 (a) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced rear chassis crossmember (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

o/s inner sill corroded

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

advise slight blow on rear exhaust box

advise slight corrosion on both inner sills at front

Anti-roll bar pin or bush worn but not resulting in excessive movement Rear "D" bushes (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Fuel pump is damp *Borderline pass*

Handbrake has long travel

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Next to radiator (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component Steering rack *Borderline pass* (2.1.5 (a))

Sills are corroded

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords On inner sidewall (5.2.3 (d) (i))

Anti-roll bar pin or bush worn but not resulting in excessive movement Rear "D" bushes (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Fuel pump is damp *Borderline pass*

Handbrake has long travel

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive Next to radiator (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component Steering rack *Borderline pass* (2.1.5 (a))

Sills are corroded

Front offside sill is corroded

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive Next to radiator (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Inner Brake pad(s) wearing thin (3.5.1g)

Oil leak ()

Power steering component(s) has slight seepage from a component Steering rack (2.3.3b)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement "D" bushes (2.4.G.2)

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt Both front (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded Next to radiator (2.4.A.3)

Rear fog lamp not working (1.3.2b)

Coolant leak ()

Front offside sill is corroded

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive Next to radiator (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Inner Brake pad(s) wearing thin (3.5.1g)

Offside Rear Nail in tyre ()

Oil leak ()

Power steering component(s) has slight seepage from a component Steering rack (2.3.3b)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement "D" bushes (2.4.G.2)

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt Both front (2.4.G.2)

Anti-roll bar rubber bush deteriorated but not resulting in excessive movement Both rear "D" bushes (2.4.G.2)

Oil leak

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt Both front (2.4.G.2)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt And slight play (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Rear fog lamp not working (1.3.2b)

Anti-roll bar rubber bush deteriorated but not resulting in excessive movement Both rear "D" bushes (2.4.G.2)

Oil leak

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt Both front (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

offside front bump stop broken

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

offside front bump stop broken

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Horn not working (1.6.2a)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Registration plate lamp not working (1.1.5c)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

unable to test both rear wheel bearings for roughness as constant 4wd road tested no noise

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

unable to test both rear wheel bearings for roughness as constant 4wd road tested no noise