1996 Mazda MX-5

Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced outer sills both sides (6.1.1 (c) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Emissions unable to be completed (8.2.2.2 (e))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sills (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sills (6.1.1 (c) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced outer sills both sides (6.1.1 (c) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Suspension arm ball joint dust cover severely deteriorated upper arm ball joints both sides (5.3.4 (b) (i))

Front Suspension arm corroded but not seriously weakened both arms both sides (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened all arms both sides (5.3.3 (b) (i))

under side under sealed

outer sills corroded

Handbrake travel

Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive Sill corroded (7.1.1 (a) (i))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Side repeater not working (4.4.1 (a) (ii))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded (7.1.1 (a) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Handbrake travel

Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive Sill corroded (7.1.1 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive both outer sills (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

handbrake lever has travel

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

advise under body surface corrision

Front Headlamp aim too high (1.8)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front brake disc excessively pitted (3.5.1h)

Rear brake disc excessively pitted (3.5.1h)

advise under body surface corrision

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Rear Rear fog lamp not working (1.3.2b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Shock absorber has a light misting of oil (2.7.3)

non d.v.l.a reg car