2004 Mazda Bongo

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

rear chassis corrosion

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

rear chassis corrosion

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

os inner sill corroded

Front Power steering component has slight seepage from a component steering rack (2.1.5 (a))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Nail in tyre ()

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive inner sill corroded (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear chassis corrosion

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Power steering component has slight seepage from a component steering rack (2.1.5 (a))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Nail in tyre ()

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive inner sill corroded (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear chassis corrosion

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Coolant leak top hose at bottom connection ()

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering component has slight seepage from a component seepage at steering rack (2.1.5 (a))

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Coolant leak top hose at bottom connection ()

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering component has slight seepage from a component seepage at steering rack (2.1.5 (a))

surface corrosion to various areas under vehicle

Front Suspension arm ball joint excessively worn both (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (5.3.6 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced tow bar area (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Power steering component(s) has slight seepage from a seal rack (2.3.3b)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Headlamp damaged but light output not reduced (1.7.5a)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm 215 65 15 (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Power steering component(s) has slight seepage from a seal rack (2.3.3b)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Headlamp damaged but light output not reduced (1.7.5a)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Rear Brake pad(s) wearing thin (3.5.1g)

Headlamp deteriorated but light output not reduced both (1.7.5a)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Power steering component(s) has slight seepage from a component (2.3.3b)

Power steering component(s) has slight seepage from a seal rack (2.3.3b)

Suspension arm corroded but not seriously weakened both front (2.4.G.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement both front (2.4.G.2)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear fog lamp not working (1.3.2b)

Headlamp deteriorated but light output not reduced both (1.7.5a)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Power steering component(s) has slight seepage from a component (2.3.3b)

Power steering component(s) has slight seepage from a seal rack (2.3.3b)

Suspension arm corroded but not seriously weakened both front (2.4.G.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement both front (2.4.G.2)

Offside Inner centre of inner sill holed but not within prescribed area

Power steering component(s) has slight seepage from a component rack (2.3.3b)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Inner centre of inner sill holed but not within prescribed area

Power steering component(s) has slight seepage from a component rack (2.3.3b)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Power steering component(s) has slight seepage from a joint (2.3.3b)

offside rear inner wheel arch heavily undersealed

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Power steering component(s) has slight seepage from a joint (2.3.3b)

offside rear inner wheel arch heavily undersealed

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Suspension component mounting prescribed area is inadequately repaired (2.4.A.3)

Power steering component(s) leaking (2.3.3b)

Rear fog lamp missing (1.3.2a)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Outer Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Outer Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)