MOT Status
ValidMileage
132,097 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Headlamp has a product on the lens but not seriously reducing light output Both fronts. (4.1.4 (b))
Offside Front Play in steering rack inner joint(s) ()
Oil leak, but not excessive Slight oil leak from engine. (8.4.1 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Power steering component has slight seepage from a component rack (2.1.5 (a))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))
Offside Rear reversing light not working
corrosion around rear axle
front brakes binding by hand
Nearside Front Windscreen washer not working (3.5 (a))
Offside Front Windscreen washer not working (3.5 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Power steering component has slight seepage from a component rack (2.1.5 (a))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))
Offside Rear reversing light not working
corrosion around rear axle
front brakes binding by hand
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
P.A.S leak around steering rack
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
P.A.S leak around steering rack
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Lower windscreen damaged zone b
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Power steering component has slight seepage from a component (2.1.5 (a))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Lower windscreen damaged zone b
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Power steering component has slight seepage from a component (2.1.5 (a))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front beam image weak
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Service brake juddering slightly (3.7.C.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake lever has little reserve travel (3.1.6b)
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner left hand side wheel arch (5.2.6)
Front Service brake juddering slightly (3.7.C.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake lever has little reserve travel (3.1.6b)
Front Service brake juddering slightly (3.7.C.2)
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside headlamp beam image weak
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Front inner sill both sides corroded
Nearside headlamp beam image weak
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Both side front inner sills and offside rear wing lower edge corroded.
Both front inner sills corroded outside of prescribed zone
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Radiator cross member corroded
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front front brake binding (3.7.B.1)
Radiator cross member corroded
Both front inner sills corroded outside of prescribed zone
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Cross member under radaitor corroded
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside and nearside front inner sills corroded outside of prescribed zone
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside and nearside front inner sill corroded outside prescribed zone. Front crossmember uder radiator corroded. Minor leak rear coolant pipe.
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside and nearside front inner sill corroded outside prescribed zone. Front crossmember uder radiator corroded. Minor leak rear coolant pipe.
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Minor uneven wear inner edge of nearside rear tyre
OFFSIDE FRONT CROSSMEMBER RUSTY NOT YET HOLED
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N213 RAP is a 2007 Mazda Bongo in Red with a 2,490cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 62.5%.
Across all 2007 Mazda Bongo models, the average MOT pass rate is 66.1% with a typical mileage of 134,152 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying N213 RAP, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 19 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of N213 RAP?
You can check the full history of N213 RAP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N213 RAP registered?
N213 RAP is a 2007 Mazda Bongo, first registered on 14 February 2007.
Is N213 RAP safe to buy?
The MOT history for N213 RAP shows 32 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N213 RAP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N213 RAP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.