1995 Toyota MR2

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Brake damaged, but the braking system is not adversely affected all 4 backing plates (1.1.21 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened front and rear surfaced corroded (1.1.14 (a) (ii))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting repair covered in underseal inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal inner sill (5.3.6 (a) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

adv rear park brake efficiency on 16%

adv unable to see inner wheel arches due to covers

adv under body heavily under sealed

Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Heavy corrosion front and rear sub frames not weekend.

passinger side mirror missing

both front brake backing plates corroded/loose and off side rear.

Nearside Front Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Outer Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Heavy corrosion front and rear sub frames not weekend.

passinger side mirror missing

both front brake backing plates corroded/loose and off side rear.

Hole on inner arch not afecting rear off side lower suspension mounting.

Surface corrosion front suspension components

front and rear disks corroded due to being standing.

Offside Obligatory mirror missing (3.3 (a))

Hole on inner arch not afecting rear off side lower suspension mounting.

Surface corrosion front suspension components

front and rear disks corroded due to being standing.

adv corrosion on both front upper top strut mounts.

adv corrosion on front and rear coil springs

adv corrosion on front and rear suspension components

adv nearside front side repeater lense missing

adv offside rear shocker weak.

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Position lamp not working (4.2.1 (a))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Windscreen wiper blade defective both (3.4 (b) (i))

adv corrosion on both front upper top strut mounts.

adv corrosion on front and rear coil springs

adv corrosion on front and rear suspension components

adv nearside front side repeater lense missing

adv offside rear shocker weak.

Adv front and rear suspension bushes deteriated no play at time of test

Adv surface corrosion on brake pipe ferralls.

Adv surface corrosion on front and rear suspension components.

Tyre worn close to the legal limit Both front bold inner edge nearly down to canvas .centre 3/4on limmit (4.1.E.1)

Nearside front brake binding (3.7.B.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside front brake binding (3.7.B.1)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

n/s/f brake slightly binding