1996 Fiat Ducato

Emissions unable to be completed (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases silencer (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine bay engine mount area (6.1.1 (c) (i))

Offside Headlamp aim too low (4.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced several places (6.1.1 (c) (i))

body mounts corroded nearside outer all and offside

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced o/s and n/s chassis legs (6.1.1 (c) (i))

Hazard warning lamps inoperative (4.4.1 (e))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner and outer sill and step (6.1.1 (c) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch behind shock absorber (5.3.6 (a) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))

Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii))

Windscreen wiper does not clear the windscreen effectively o/s and n/s (3.4 (b) (ii))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Play in steering rack inner joint(s) ()

Parking brake lever defective but can be satisfactorily operated (1.1.6 (d))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front sill corroded

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

corrosion under vehicle

Offside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Rear Position lamp light intensity significantly reduced both (4.2.3 (a) (ii))

Stop lamp(s) light intensity significantly reduced both (4.3.3 (a) (ii))

Nearside Front sill corroded but outside prescribed area

Brake hose has slight corrosion to ferrule all brake flexi hose ferrules corroded (1.1.12 (f) (i))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Coil spring corroded both springs corroded (5.3.1 (b) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Nearside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive inner sill step starting to corrode (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive upper inner turret starting to corode (5.3.6 (a) (i))

Nearside Front Suspension component mounting repair covered in underseal inner wing covered in under seal (5.3.6 (a) (i))

Offside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive inner sill and step starting to corode (7.1.1 (a) (i))

Offside Front Inner Suspension component mounting repair covered in underseal inner wing covered in under seal (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced all rest of chassis starting to show signs of corrosion (6.1.1 (c) (i))

all exhaust mounting rubbers perishing

all rear suspension corroded inc leaf springs

Electrical wiring insecure and connectors likely to become disconnected gearbox wiring (4.11 (a) (ii))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Side repeater not working (4.4.1 (a) (ii))

Offside Front Upper Outline marker lamp does not illuminate simultaneously with the position lamps (4.2.2 (a))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Windscreen washer not working (3.5 (a))

Brake hose has slight corrosion to ferrule all ferrules corroded (1.1.12 (f) (i))

Exhaust mounting defective all rubber mounts perished (6.1.2 (a))

Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Front Coil spring corroded both springs corroded (5.3.1 (b) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear both rear helper springs loose

Vehicle structure is corroded but structural rigidity is not significantly reduced all chassis corroded (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view scratches to windscreen (3.2 (a) (i))

Brake pipe corroded, covered in grease or other material multiple (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

headlamp beam deflectors fitted

vehicle had welding and heavily undersealed

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Front Outline marker lamp not working (4.2.1 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS / INNER WING / ARCH (5.3.6 (a) (i))

Offside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Windscreen washer not working (3.5 (a))

N/S/F INNER WING CORRODED

O/S/F INNER WING CHASSIS CORRODED

Battery insecure (1.9.1)

Nearside Front Steering system excessively tight strut top mount (2.2.D.1)

Offside Front Subframe mounting prescribed area is excessively corroded front mount has corrosion hole (2.4.A.3)

Offside Front front brake excessively fluctuating (3.7.B.3)

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Rear wheel bearing has slight play both (2.6.2)

Rear Shock absorber has slight corrosion to the casing both (2.7.2a)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive both (2.4.A.3)

rear brake fluctuating, but not excessively both (3.7.B.3)

Front Brake hose slightly deteriorated all four (3.6.B.4d)

Front Suspension component mounting prescribed area is corroded but not considered excessive chassis rails engine bay (2.4.A.3)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly and clicking (2.5.B.1b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis rails (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wings (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (2.4.A.3)

Rear Rear wheel bearing has slight play both (2.6.2)

Suspension component mounting prescribed area is corroded but not considered excessive under side corroded (2.4.A.3)

Horn not working (1.6.2a)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis rail, (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Rear Registration plate lamp not working (1.1.C.1d)

Front Brake hose slightly deteriorated all four (3.6.B.4d)

Front Suspension component mounting prescribed area is corroded but not considered excessive chassis rails engine bay (2.4.A.3)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly and clicking (2.5.B.1b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis rails (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wings (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (2.4.A.3)

Rear Rear wheel bearing has slight play both (2.6.2)

Suspension component mounting prescribed area is corroded but not considered excessive under side corroded (2.4.A.3)

Front Body has slight corrosion (6.1.B.2)

Nearside Front Body has slight corrosion (6.1.B.2)

Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (2.4.B.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Rear wheel bearing has slight play (2.6.2)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Electrical wiring insecure (1.9.2a)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Offside rear brake binding (3.7.B.1)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front wheel bearing has slight play (2.5.A.3c)

underside has heavy surface corrosion.some corrosion under both front wheel arches extensive welding repairs carried out to steps and o/s/f chassis.steering rack has a slight oil leak and pipes are rusty

windscreen marked. n/s/r lens mounting has tape repair.steering rack appears to have a slight oil leak

Steering column universal joint has excessive play (2.1.5)

windscreen marked. n/s/r lens mounting has tape repair.steering rack appears to have a slight oil leak

light scractches on windscreen

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

light scractches on windscreen

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear fog lamp not working (1.3.2b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)