1996 Mazda Friendee

Nearside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under arch (5.3.6 (a) (i))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front crossmember corroded

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Inner sill corroded

Offside Inner sill corroded

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Inner sill corroded

Offside Inner sill corroded

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Nearside front brake binding (3.7.B.1)

Offside Stop lamp not working (1.2.1b)

Offside front brake binding (3.7.B.1)

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (2.4.A.3)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Headlamp not working on dipped beam (1.7.5a)

Registration plate lamp not working (1.1.C.1d)

Fuel system component leaking (7.2.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded Sill (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded Outer sill (2.4.A.3)

Corrosion under offside front arch

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)

front brake application uneven (3.7.B.2)

rear brake application uneven (3.7.B.2)

Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Brakes imbalanced across an axle (3.7.B.5b)

Offside Rear fog lamp not working (1.3.2b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Emissions not tested (7.0)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear fog lamp insecure (1.3.2a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)