1996 Mazda Bongo

ALL UNDERSIDE UNDERSEALED !!!

Nearside Rear Vehicle structure is repaired but structural rigidity is not significantly reduced UNDERSEALED!!! (6.1.1 (d) (i))

Offside Rear Vehicle structure is repaired but structural rigidity is not significantly reduced UNDERSEALED !! (6.1.1 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting SILL AREA (6.2.2 (d) (i))

ALL UNDERSIDE UNDERSEALED !!!

Nearside Rear Vehicle structure is repaired but structural rigidity is not significantly reduced UNDERSEALED!!! (6.1.1 (d) (i))

Offside Rear Vehicle structure is repaired but structural rigidity is not significantly reduced UNDERSEALED !! (6.1.1 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pipe corroded, covered in grease or other material x2 (1.1.11 (c))

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear All position lamps slightly affected by the operation of another lamp (4.2.3 (c))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Nearside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Suspension component pin or bush slightly worn rear wishbone (5.3.4 (a) (i))

Nearside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Electrical wiring likely to drag on the ground (4.11 (a) (iii)) DANGEROUS

Electrical wiring inadequately secured (4.11 (a) (i))

Nearside Front Suspension component pin or bush slightly worn rear wishbone (5.3.4 (a) (i))

Horn not working (1.6.2a)

Offside Rear fog lamp emits a light other than red (1.3.2e)

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front Tyre has slight damage on sidewall

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Rear fog lamp emits a light other than red (1.3.2e)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear fog lamp tell tale not working (1.3.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front brake disc excessively pitted (3.5.1h)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Exhaust has a major leak of exhaust gases (7.1.2)