MOT Status
ExpiredMileage
178,910 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Suspension component mounting prescribed area is corroded but not considered excessive both outer sills (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Anti-roll bar pin or bush excessively worn d rubber (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Suspension component mounting prescribed area is corroded but not considered excessive both outer sills (5.3.6 (a) (i))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Outer Suspension arm ball joint dust cover severely deteriorated Boot perishing (5.3.4 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Outer Suspension arm ball joint dust cover severely deteriorated Boot perishing (5.3.4 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Position lamp not working (4.2.1 (a))
Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Outer Suspension arm ball joint dust cover severely deteriorated Boot perishing (5.3.4 (b) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Outer Suspension arm ball joint dust cover severely deteriorated Boot perishing (5.3.4 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Front Outer Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.4.G.4e)
Nearside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)
Nearside Rear Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Rear Stop lamp not working o/s and n/s (1.2.1b)
Central exhaust corroded
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
suggest adjust auxiliary belts
Nearside Front Inner Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Windscreen wiper does not clear the windscreen effectively arm seized (8.2.2)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Central exhaust corroded
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
suggest adjust auxiliary belts
Back of fuel pump is slightly damp
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Anti-roll bar has slight play in a pin/bush "D" bushes (2.4.G.2)
Suspension arm rubber bush deteriorated but not resulting in excessive movement Both front arm rear bushes (2.4.G.2)
Fuel system component leaking (7.2.3)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Anti-roll bar has slight play in a pin/bush "D" bushes (2.4.G.2)
Suspension arm rubber bush deteriorated but not resulting in excessive movement Both front arm rear bushes (2.4.G.2)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Brake pad(s) wearing thin (3.5.1g)
knock to front on play found
Nearside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Brake pad(s) wearing thin (3.5.1g)
knock to front on play found
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Battery insecure (1.9.1)
Offside Battery insecure (1.9.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Both Front Anti Roll Bar Link Dust Covers Split
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside outer track rod end joint cover split/missing
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Inner Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Offside Rear fog lamp missing (1.3.2a)
Rear fog lamp switch missing (1.3.1a)
Nearside Outer Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside outer track rod end joint cover split/missing
Offside Outer Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda MPV?
Based on 44,611 MOT tests across 3,157 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N258 XTT is a 1996 Mazda MPV in White with a 1,998cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 1996 Mazda MPV models, the average MOT pass rate is 66.3% with a typical mileage of 132,589 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MPV fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,975 recorded failures. If you're considering buying N258 XTT, it's worth having these areas checked by a mechanic before committing.
The Mazda MPV typically stays on UK roads for around 31 years. At 30 years old, this Mazda MPV is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of N258 XTT?
You can check the full history of N258 XTT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N258 XTT registered?
N258 XTT is a 1996 Mazda MPV, first registered on 31 December 1996.
Is N258 XTT safe to buy?
The MOT history for N258 XTT shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N258 XTT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N258 XTT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.