1995 Honda Vfr

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear reflector missing (4.8.2 (a) (ii))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Brake excessively binding (1.2.1 (f))

Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) DANGEROUS

Rear Brake disc fractured (1.1.14 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Tyre worn close to the legal limit showing signs of cracking (5.2.3 (e))

Drive chain sprocket worn to excess (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Headlamp aim not tested (4.1.2 (b))

Headlamp light source and lamp not compatible (4.1.4 (c))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Front Tyre worn close to the legal limit showing signs of cracking (5.2.3 (e))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Drive chain worn but not considered excessive (6.2.1e)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Floor brake test indicates a binding brake (3.3.C2c)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Drive chain worn but not considered excessive (6.2.1e)

Rear wheel bearings have slight free play (2.4.A.2c)

Brake hose fouling (3.2.B3b)

Direction indicators affected by the operation of another lamp (1.5.1c)

Offside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Offside Rear Direction indicator not working (1.5.1c)

Stop lamp insecure (1.3.3b)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Fairings insecure but not likely to impede the steering (2.1.2e)

Nearside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pedal cannot be released smoothly (3.1.3d)

Rear Registration plate margin less than the minimum requirement (6.3.4g)