MOT Status
ValidMileage
65,841 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
considerable welded repair to vehicle
engine area oily underneath
washers / wipers could be better
considerable welded repair to vehicle
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength floorpan / inner sill (5.3.6 (a) (i))
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan / inner sill (5.3.6 (a) (i))
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
considerable welded repair to vehicle
Nearside Rear axle mounting deteriorated
engine / gearbox area oily underneath
floorpans and sills corroded considerably
widespread welded repair to vehicle
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear axle mounting deteriorated
engine / gearbox area oily underneath
floorpans and sills corroded considerably
widespread welded repair to vehicle
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear metal brake pipe slightly corroded
some welded repair to vehicle
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear metal brake pipe slightly corroded
some welded repair to vehicle
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/floor (5.3.6 (a) (i))
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/floor (5.3.6 (a) (i))
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Upper Sub-frame attachment bracket/mounting insecure rubber bush missing (5.3.3 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end of sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor to sill (5.3.6 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive end of sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Seat belt anchorage prescribed area is excessively corroded mid height front of off side inner rear wheel arch area (5.2.6)
Seat belt anchorage prescribed area is excessively corroded near side outer sill panel area (5.2.6)
Seat belt anchorage prescribed area is excessively corroded off side rear wheel arch area (5.2.6)
Seat belt anchorage prescribed area is excessively corroded rear of near side inner sill / inner arch area (5.2.6)
Seat belt anchorage prescribed area is excessively corroded rear of off side inner sill / inner arch area (5.2.6)
numerous other areas of underbody rusting or previously repaired
some metal brake pipes rusting
some suspension components rusting
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Seat belt anchorage prescribed area is inadequately repaired (5.2.6)
front to rear metal brake pipes rusting
near side parking brake effort low
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear brake disc excessively pitted (3.5.1h)
Service brake: efficiency below requirements (3.7.B.7)
Front brake disc slightly pitted (3.5.1h)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Suzuki Cappuccino?
Based on 11,869 MOT tests across 1,070 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N26 DEH is a 1995 Suzuki Cappuccino in Red with a 657cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 65.6%.
Across all 1995 Suzuki Cappuccino models, the average MOT pass rate is 69.4% with a typical mileage of 61,292 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Suzuki Cappuccino fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 1,923 recorded failures. If you're considering buying N26 DEH, it's worth having these areas checked by a mechanic before committing.
The Suzuki Cappuccino typically stays on UK roads for around 33 years. At 31 years old, this Suzuki Cappuccino is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of N26 DEH?
You can check the full history of N26 DEH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N26 DEH registered?
N26 DEH is a 1995 Suzuki Cappuccino, first registered on 28 September 1995.
Is N26 DEH safe to buy?
The MOT history for N26 DEH shows 32 tests with a 65.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N26 DEH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N26 DEH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.