1995 Toyota MR2

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength end (5.3.6 (a) (i))

Offside Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Service brake grabbing slightly (1.2.1 (c))

Nearside Rear Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Anti-roll bar linkage ball joint dust cover severely deteriorated both rear (5.3.4 (b) (i))

Tyre slightly damaged/cracking or perishing all (5.2.3 (d) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Inner Track rod end ball joint has excessive play (2.2.B.1f)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Main beam 'tell-tale' not working (1.7.4c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) wearing thin (3.5.1g)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

exhaust blow from cat to rear silencer flange, both flanges heavily corroded.

nsf foglamp cracked

Tyre worn close to the legal limit (4.1.E.1)

Offside rear brake juddering slightly (3.7.A.5b)

Tyre worn close to the legal limit (4.1.E.1)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Offside rear brake juddering slightly (3.7.A.5b)

Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)