2006 Mazda Bongo

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear x member at tow bar (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive at spring mount area (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases At Back Box (7.1.2)

Oil leak ()

Power sterring Leak

Rear Wiper Inop & Split

Exhaust has a major leak of exhaust gases rear section (7.1.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Offside Headlamp has a product on the light source so that the light output is severely reduced (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Offside Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded section (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Oil leak ()

Oil leak ()

all wheel arches corroded

both front brake discs corroded/worn

both rear brake discs corroded

brake pedal rubber slightly worn

Offside Front Seat belt cut but webbing not significantly weakened (5.2.2a)

all previous welding repairs covered in under seal

brake pedal rubber slightly worn

Horn not working (1.6.2a)

Offside Front Seat belt has a cut which has significantly weakened the webbing (5.2.2a)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc outer (2.5.C.1a)

Offside Headlamp has a product on the light source so that the light output is severely reduced (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Suspension component mounting prescribed area is inadequately repaired inner wheel arch area (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Offside Seat belt anchorage prescribed area is inadequately repaired outer sill (5.2.6)

Offside Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

all previous welding repairs covered in under seal

brake pedal rubber slightly worn

both innersills corroded

both outersills corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front constant velocity joint is slightly worn (2.5.C.1b)

Oil leak

all welding repairs covered in underseal

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Seat belt has a cut which has significantly weakened the webbing (5.2.2a)

Offside Headlamp has a product on the light source so that the light output is severely reduced (1.7.5a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Oil leak

both innersills corroded

both outersills corroded

n/s/r tyre cut across tread section

Fuel pipe/s corroded

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

o/s innersill corrorded/holed

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Fuel pipe/s corroded

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

o/s innersill corrorded/holed

o/s outersill corrorded/holed

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Headlamp adversely affected by the operation of another lamp (1.7.5c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

off side front tyre worn on inside edge.

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Rear fog lamp not working (1.3.2b)

off side front tyre worn on inside edge.

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear fog lamp missing (1.3.2a)

Oil leak

squealing noise from nearside front wheel

Nearside Front constant velocity joint is excessively worn (2.5.C.1b)

Nearside Headlamp aim beam image kick up to the offside (1.8)

Nearside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Offside Headlamp aim beam image kick up to the offside (1.8)

Offside Rear fog lamp missing (1.3.2a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak