2005 Mazda Bongo

Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced Crossmember (6.1.1 (c) (i))

Nearside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement "D" Bush (5.3.4 (a) (i))

Offside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust has a minor leak of exhaust gases middle flexi (6.1.2 (a))

Nearside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Front wing has corrosion

Offside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Exhaust has a major leak of exhaust gases flexi (6.1.2 (a))

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Nearside Front has corrosion

Offside Front Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))

Exhaust has a minor leak of exhaust gases center section and front section (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced offside inner sil close to seat belt anchor (6.1.1 (c) (i))

Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside inner sils front mount rear trailing arms (5.3.6 (a) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Suspension component mounting prescribed area is corroded but not considered excessive offside and nearside (5.3.6 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive offside and nearside (5.3.6 (a) (i))

Stop lamp(s) all not working (4.3.1 (a) (iii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (crossmember) (5.3.6 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (inner sill) (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (crossmember) (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (inner sill) (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (outer sill) (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Steering box has a significant oil leak rack (2.2.D.2e)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front registration plate missing (6.3.1a)

Fuel cap/sealing device missing (7.2.4a)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Fuel cap/sealing device missing (7.2.4a)

Offside Steering rack gaiter split (2.2.D.2d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Stop lamp not working (1.2.1b)

Offside Rear fog lamp insecure (1.3.2a)

Offside Steering rack gaiter split (2.2.D.2d)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)

Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Rear fog lamp missing (1.3.2a)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear fog lamp insecure (1.3.2a)

Offside Rear fog lamp not working (1.3.2b)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Rear fog lamp excessively damaged so that it is not visible from a reasonable distance (1.3.2d)

Nearside Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Rear Rear fog lamp not working (1.3.2b)