1996 Suzuki AE50

All direction indicators not working both front and both rear. (4.4.1 (a) (ii))

All position lamps not working front and rear. (4.2.1 (a))

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Shock absorber has negligible damping effect front shockers have no damping effect, stiff. (5.3.2 (b))

Stop lamp not working when front and rear brake applied rear brake light not working. (4.3.1 (a) (ii))

Motorcycle structure is corroded but structural rigidity is not significantly reduced frame. (6.1.1 (c) (i))

Wheel corroded but not to excess front and rear. (5.2.2 (c) (i))

Motorcycle structure slightly corroded (6.1.1a)

Front Direction indicators flashing less than 60 times a minute (1.5.1c)

Headlamp aim too low (1.6)

Horn not loud enough to be heard by another road user (1.7.3a)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front suspension assembly slightly corroded. (2.3.1)

Motorcycle structure slightly corroded (6.1.1a)

Nearside Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Offside Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

battery flat.

both front forks corroding and pitting.

engine to frame mounting bracket corroding.

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Exhaust is leaking and excessively noisey (7.1.1b)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

front tyre flat.

rear tyre flat.

recommend tyre presures checked and adjusted.

Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Motorcycle structure slightly corroded (6.1.1a)

Nearside Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Exhaust is leaking but is not excessively noisey (7.1.1b)

front forks corroded and pitting.

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

bike frame corroding.

exhaust system corroding and in poor condition.

front and rear tyre tread getting low.

front shock absorbers pitting and corroding.

front tyre perishing and wearing unevenly.

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)