1995 Honda Civic

Fuel Pipe/s corroded Front to rear ()

Nearside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Fuel Pipe/s corroded Front to rear ()

Nearside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Offside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit worn on 1.6mm (4.1.E.1)

Offside Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Trailing arm rubber bush deteriorated but not resulting in excessive movement both rear (2.4.G.2)

different size tyres fitted front and rear

service brake efficiency 55percent

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front Trailing arm rubber bush deteriorated resulting in excessive movement spliting away from arm (2.4.G.2)

Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front brake application uneven (3.7.B.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit worn on 1.6mm (4.1.E.1)

Offside Front Upper Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

service brake efficiency only just met 51percent

Child seat fitted not allowing full inspection of adult belt

Front bumper insecure

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Upper Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Upper Vehicle structure has slight corrosion (6.1.B.2)

Nearside Headlamp aim too low (1.8)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim too low (1.8)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Coolant leak

Centre Rear Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)