CarVerify

Free Car Check

N324 LUM

1996 Iveco 35.10 SWB

White Diesel 2500cc
Search another vehicle

MOT Status

Expired
Expires1 Jun 2014
Tests11 (7 pass, 4 fail)
Pass rate63.6%

Mileage

80,867 mi
Last recorded80,867 miles
Recorded on23 May 2014
Typical for 1996 Iveco 35.10 SWB120,804 mi

Below or average mileage for this year

4 checks still locked for this Iveco
Stolen
Finance
Write-off
Keepers
Unlock full report — £4.99
Instant £30k guarantee
or single check £9.99

Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.

Vehicle Details

RegistrationN324 LUM
MakeIveco
Model35.10 SWB
Year1996
ColourWhite
Fuel typeDiesel
Engine2,500cc

All premium checks include

50+ data points
Finance Check (Experian) Insurance Write-off Salvage Auction Stolen Check Previous Owners Ex-Taxi, Police, NHS Mileage Anomaly Import / Export Scrapped Check Plate Changes

MOT History

7 pass 4 fail
Fail 23 May 2014 80,867 miles

Centre Front Brake hose ferrule excessively corroded (3.6.B.4e)

Centre Front registration plate delaminated (6.3.1d)

Centre Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Centre Rear Registration plate lamp not working (1.1.C.1d)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Battery insecure (1.9.1)

Nearside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)

Nearside Front Electrical wiring damaged and bare connector exposed (1.9.2c)

Nearside Front Electrical wiring insecure (1.9.2a)

Nearside Front Headlamp does not operate immediately when selected on main beam (1.7.4a)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Electrical wiring inadequately supported (1.9.2a)

Nearside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement (2.4.B.2)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Body has a sharp edge caused by damage (6.1.C.1)

Offside Front Electrical wiring damaged and bare connector exposed (1.9.2c)

Offside Front Electrical wiring insecure (1.9.2a)

Offside Front Headlamp aim too low (1.8)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement (2.4.B.2)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Steering rack insecure (2.2.B.1a)

Vehicle Identification Number not permanently displayed (6.3.5.a)

Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1) DANGEROUS

Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1) DANGEROUS

Steering system has excessive free play detected at the steering wheel (steering rack fitted) (2.2.A.1b) DANGEROUS

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front bumper insecure

Nearside Front Body has slight displacement of the body relative to the chassis (6.1.B.1a)

Nearside Front Brake hose slightly damaged (3.6.B.4d)

Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Upper Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front Vehicle structure has slight corrosion (6.1.A.1)

Nearside Rear Leaf spring has a slightly deteriorated anchor pin rubber bush not resulting in excessive movement (2.4.B.2)

Nearside Rear Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear rear parking (secondary) brake grabbing slightly (3.7.B.6b)

Nearside Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Body has slight displacement of the body relative to the chassis (6.1.B.1a)

Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Upper Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Vehicle structure has slight corrosion (6.1.A.1)

Offside Rear Leaf spring has a slightly deteriorated anchor pin rubber bush not resulting in excessive movement (2.4.B.2)

Offside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear rear parking (secondary) brake grabbing slightly (3.7.B.6b)

Offside Vehicle structure has slight corrosion (6.1.A.1)

Play in prop-shaft centre bearing

Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

both rear suspension bump stops missing but not affecting suspension operation

rear exhaust section deteriorated and corroded

Oil leak

Pass 31 May 2013 77,527 miles
Fail 28 May 2013 77,507 miles

Horn not working (1.6.2a)

Nearside Front Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)

Nearside Headlamp adversely affected by the operation of another lamp (1.7.5c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside rear brake recording little or no effort (3.7.B.5a)

Service brake: efficiency below requirements (3.7.B.7)

Pass 18 May 2012 76,561 miles

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

both front brake discs corroded

Pass 2 Jun 2011 75,376 miles
Fail 26 May 2011 75,360 miles

Brakes imbalanced across an axle (3.7.B.5b)

Fuel system component leaking (7.2.3)

Nearside Front front brakes release unevenly (3.7.B.4)

Offside Front front brakes release unevenly (3.7.B.4)

Pass 27 May 2010 73,985 miles
Pass 6 Oct 2008 72,426 miles
Pass 12 Oct 2007 68,997 miles

Vehicle structure has slight corrosion (6.1.A.1)

all body panels in rough condition

Pass 4 Oct 2006 66,727 miles

Nearside Front Headlamp damaged but light output not reduced (1.7.5a)

Nearside Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)

Fail 7 Sep 2006

Fuel system component leaking (7.2.3)

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

How Reliable is the Iveco 35.10 SWB?

Based on 4,003 MOT tests across 700 vehicles.

61.4%
Pass Rate
2,591
Miles/Year
32
Year Lifespan
700
On UK Roads

Top MOT Failure Points

Brake pipe excessively corroded 436
Parking brake: efficiency below requirements 308
Registration plate lamp not working 263
Service brake: efficiency below requirements 249
Tyre tread depth below requirements of 1.6mm 215
Full Iveco 35.10 SWB reliability report

Don't risk it. Know before you buy.

Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.

£30k guarantee Instant results Cancel anytime

N324 LUM is a 1996 Iveco 35.10 SWB in White with a 2,500cc diesel engine. This vehicle has been through 11 MOT tests with a personal pass rate of 63.6%.

Across all 1996 Iveco 35.10 SWB models, the average MOT pass rate is 60.8% with a typical mileage of 120,804 miles. This particular vehicle has performed better than the average for its year.

The most common reason a Iveco 35.10 SWB fails its MOT is brake pipe excessively corroded, accounting for 436 recorded failures. If you're considering buying N324 LUM, it's worth having these areas checked by a mechanic before committing.

The Iveco 35.10 SWB typically stays on UK roads for around 32 years. At 30 years old, this Iveco 35.10 SWB is approaching the upper end of the typical lifespan for this model.

Frequently Asked Questions

How do I check the history of N324 LUM?

You can check the full history of N324 LUM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.

What year was N324 LUM registered?

N324 LUM is a 1996 Iveco 35.10 SWB, first registered on 18 April 1996.

Is N324 LUM safe to buy?

The MOT history for N324 LUM shows 11 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.

Does N324 LUM have outstanding finance?

Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N324 LUM. If you buy a car with outstanding finance, the finance company can repossess it.

No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.