1996 Yamaha Rxs

Chain guard missing ()

Front wheel bearings have slight free play (2.3.5b)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front shock absorber seal failed and leaking oil both (2.3.3)

Fuel cap mounting flange/sealing method defective unable to inspect (7.2.2c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride front wheel nut split pin (6.2.1h)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear brake anchor arm split pin missing (6.2.1h)

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Rear Tyre valve stem misaligned which could cause sudden tyre deflation (4.1.2c)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies when operating front brake (1.3.1a)

Chain guard missing ()

Front wheel bearings have slight free play (2.3.5b)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension assembly slightly corroded. forks (2.3.1)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear position lamp damaged but function not impaired (1.1.1b)

Rear wheel bearings have slight free play (2.4.A.2c)

Nearside Front Direction indicator damaged and function impaired white light rear (1.5.3a)

Registration plate deteriorated (6.3.1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension assembly slightly corroded. forks (2.3.1)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear position lamp damaged but function not impaired (1.1.1b)

Rear wheel bearings have slight free play (2.4.A.2c)

Exhaust noisy (7.1.2)

Front Brake lever mounting cracked (3.1.2c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Horn not loud enough to be heard by another road user (1.7.3a)

Nearside Rear Direction indicator not working (1.5.1c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Upper Steering headbearing has excessive free play (2.2.2)

Exhaust noisy (7.1.2)

Steering headbearing has slight free play (2.2.2)

Front Brake locking device missing (3.2.A1e)

Front Floor brake test indicates a binding brake (3.3.C2c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Rear Direction indicator not working (1.5.1c)

Rear Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Rear reflector on motorcycle missing (1.4.1)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly tight (6.2.1d)

An item not tested (Manual)

Brake component is severely distorted (3.1.5)

Brake rod excessively damaged (3.2.A1c)

Direction indicator not working (1.5.1c)

Direction indicator not working (1.5.1c)

Drive chain excessively loose (6.2.1d)

Rear reflector on motorcycle missing (1.4.1)

Steering lock stop ineffective (2.1.3)

Headlamp incorrect colour (1.2.1)

Horn not working (1.7.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Chain guard fouling another component (6.2.1c)

Drive chain excessively loose (6.2.1d)

Drive chain fouling another component (6.2.1d)

Front Direction indicator not working (1.5.1c)

Front Roller brake test indicates a binding brake (3.3.A1a)

Horn not working (1.7.3a)

Rear Direction indicator not working (1.5.1c)

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake lever has inadequate reserve travel (3.1.3b)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Fuel system component insecure (7.2.1b)

Horn not loud enough to be heard by another road user (1.7.3a)

Rear Brake pedal cannot be released smoothly (3.1.3d)

Drive chain slightly loose (6.2.1d)

Rear Drive chain sprocket slightly worn (6.2.1e)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Nearside Rear Motorcycle structure cracked (6.1.1a)

Rear Brake locking device insecure (3.2.A1e)

Headlamp aim too low (1.6)