1995 Ford Freda

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Play in steering rack inner joint(s) ()

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

O/S sill corroded

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle has welding and undersealing

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Play in steering rack inner joint(s) ()

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

O/S sill corroded

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle has welding and undersealing

Vehicle has had extensive welding repair and undersealing

Exhaust emissions likely to be affected by an exhaust leak Exhaust snapped at middle section (8.2.1.1 (b))

Fluid leak harmful to the environment or a risk to other road users Major leak from power steering rack (8.4.1 (a) (i))

Horn not working (7.7 (a) (ii))

Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Vehicle structure is deformed and structural rigidity is significantly reduced Arch behind wheel (6.1.1 (a) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both front inner wheel arches (6.1.1 (c) (i))

Handbrake travel close to limit

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive outer seal to floor (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive outer seal to floor (5.3.6 (a) (i))

hole to corrosion nearside outer sill just out of area

oil leak close to excessive

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

oil leak close to excessive

hole to corrosion nearside outer sill just out of area

handbrake high

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

handbrake high

Front Brake pad(s) wearing thin (3.5.1g)

Front Inner Anti-roll bar rubber bush deteriorated but not resulting in excessive movement both D-bushes (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch rear of sill (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Rear Inner Anti-roll bar rubber bush deteriorated but not resulting in excessive movement both D-bushes (2.4.G.2)

Driver's seat insecure (6.2.A.1)

Fuel cap/sealing device sealing washer torn (7.2.4c)

Rear fog lamp not working (1.3.2b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front Inner Anti-roll bar rubber bush deteriorated but not resulting in excessive movement both D-bushes (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch rear of sill (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Rear Inner Anti-roll bar rubber bush deteriorated but not resulting in excessive movement both D-bushes (2.4.G.2)

Both rear wheel arches rusted

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Oil leak

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust system deteriorated

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Fuel system component leaking (7.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)