1996 Renault Master

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Emissions unable to be completed fuel leak (8.2.2.2 (e))

Front Windscreen washer not working (3.5 (a))

Fuel system component leaking (6.1.3 (b) (i))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced valence near suspension (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Headlamp insecure (4.1.1 (c))

Offside Rear Service brake excessively fluctuating (1.2.1 (e))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake disc worn, pitted or scored, but not seriously weakened both front heavilly corroded (1.1.14 (a) (ii))

Exhaust mounting defective all rear (6.1.2 (a))

Nearside Front wheel arch corroded

Offside Rear Service brake binding but not excessively (1.2.1 (f))

all front suspension corroded

Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Both (2.1.3 (g) (i))

underside heavily underseal

Nearside Headlamp reflector slightly defective (4.1.1 (b) (i))

Offside Headlamp reflector slightly defective (4.1.1 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced both sides outer under body sill rusty and rear spring mounting rusty (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Suspension component mounting prescribed area is excessively corroded cross member (2.4.A.3)

Nearside Side repeater has a product on the light source so it is not visible from a reasonable distance (1.4.A.2e)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

coolant tank empty

coolant tank empty

radiator damaged

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

parking brake has just met the required efficency

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Windscreen washer provides insufficient washer liquid (8.2.3)

parking brake has just met the required efficency

osr tyre sidewall displaying age related cracking

vehicle displaying areas of corrosion acceptable for test purposes

Horn not working (1.6.2a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust system not adequately supported (7.1.1)

osr tyre sidewall displaying age related cracking

vehicle displaying areas of corrosion acceptable for test purposes

Brakes imbalanced across an axle (3.7.B.5b)

Registration plate lamp not working (1.1.C.1d)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

corrosion to nearside/offside under bonnet panels not within prescibed area

nearside rear tyre outer sidewall slight cracking

Brake load sensing valve linkage seized (3.6.E.3)

Offside Side repeater not working (1.4.A.2c)

Near side front and rear tyres perished around side walls

Oil leak

cracks appearing on outer tyre sidewalls on all tyre not severe at time of test