1996 Yamaha XJ600

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

rear tyre perishing, uneven wear and tyre weld around rim.

Headlamp aim too low (4.1.2 (a))

Rear Brake component insecure brake arm lose and locking device missing (1.1.21 (c))

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake clevis joint worn, but not excessively lever (1.1.15 (b))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

rear tyre perishing, uneven wear and tyre weld around rim.

Chain guard missing.

Drive chain and sprockets worn.

Fork stanchions pitted.

Front Brake disc(s) slightly worn (3.2.A1l)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre valve stem slightly damaged (4.1.2c)

Headlight adjuster bolt missing.

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear brake lever return spring missing.

Rear tyre starting to perish.

Side stand bolt loose.

Steering headbearing has slight free play (2.2.2)

Drive chain excessively tight (6.2.1d)

Headlamp insecure (1.2.3b)

Steering headbearing has excessive free play Top yoke nut loose. (2.2.2)

Chain guard missing.

Drive chain and sprockets worn.

Fork stanchions pitted.

Front Brake disc(s) slightly worn (3.2.A1l)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre valve stem slightly damaged (4.1.2c)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear brake lever return spring missing.

Rear tyre starting to perish.

Side stand bolt loose.

Rear Brake disc(s) slightly worn (3.2.A1l)

chain guard missing

Front wheel bearings are excessively rough (2.3.5b)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear wheel bearings have excessive free play (2.4.A.2c)

Rear Brake disc(s) slightly worn (3.2.A1l)

chain guard missing

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Fuel cap does not fasten securely by a positive means (7.2.2b)

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear reflector on motorcycle missing (1.4.1)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))