1996 Honda CBR900

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Wheel alignment slightly misaligned (2.4 (a))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

rear shock poor damping

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

clutch pivot bolt nut missing

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

chain dry

slightfluctuation front brake

Offside Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Roller brake test indicates a binding brake (3.3.A1a)

Nearside Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Front Steering lock stop maladjusted (2.1.3)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front shock absorber seal failed and leaking oil (2.3.3)

Indicator switch defective (1.5.4)

Nearside Steering lock stop ineffective (2.1.3)

Brake master cylinder has a seized master cylinder pivot. (3.2.B5) DANGEROUS

Front Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Rear Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))