1996 Mazda MPV

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting front crossmember (6.2.2 (d) (i))

head lights are dim

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front and rear x members corroded

Nearside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Registration plate inscription illegible (0.1 (b))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill area (6.1.1 (c) (i))

Headlamp patterns poor

Offside Rear shock absorber top mount displaced but secure

Exhaust has a major leak of exhaust gases back box significantly corroded and holed (7.1.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded sill area (2.4.A.3)

Nearside Headlamp aim beam image obviously incorrect no pattern (1.8.A.1b)

Nearside Rear Upper Shock absorber insecure mounting displaced (2.7.2b)

Offside Headlamp aim beam image obviously incorrect no pattern (1.8.A.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill area (2.4.A.3)

Parking brake: efficiency below requirements (3.7.C.1b)

Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear cross member significantly corroded (6.1.B.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Tyre worn close to the legal limit (4.1.E.1)

o/s/f inner cv boot insecure

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Inner Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Tyre worn close to the legal limit (4.1.E.1)

o/s/f inner cv boot insecure

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

o/s/f inner cv joint gator insecure

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Inner Front Drive shaft which forms part of the suspension damaged (2.4.G.4a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake lever has no reserve travel (3.1.6b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Front wheel bearing has excessive play (2.5.A.3c)

Offside Front Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear Rear fog lamp does not emit a steady red light (1.3.2e)

Registration plate lamp not working (1.1.5c)