1996 Yamaha YZF600

Headlamp aim too low (4.1.2 (a))

Horn not working (7.7 (a))

Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Steering headbearing slightly stiff or notchy Stiff (2.2.2 (f) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Fork inners are pitted seals may have a short service life.

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Fork inners are pitted seals may have a short service life.

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Central Front Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Drive chain slightly loose (6.2.1d)

Exhaust noisy (7.1.2)

Nearside Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Exhaust noisy (7.1.2)

Headlamp aim too high (1.6)

Nearside Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Exhaust noisy (7.1.2)

Nearside Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))