1996 Rover Mini

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Headlamp not working on dipped beam both (4.1.1 (a) (ii))

Front Headlamp not working on main beam both (4.1.1 (a) (ii))

Front Steering rack gaiter missing or no longer prevents the ingress of dirt both (2.1.3 (g) (ii))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Position lamp not working all (4.2.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

rear brake application uneven (3.7.B.2)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Subframe mounting prescribed area is excessively corroded Inner wheel arch (2.4.A.3)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front wheel bearing has slight play (2.5.A.3c)

Rear Vehicle structure has slight corrosion Subframe (6.1.A.1)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

offside front tyre worn on the inside edge