1995 Rover Mini

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive shock absorber mount (5.3.6 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing slightly perished (5.2.3 (d) (ii))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement radius arm pin (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive shock absorber mount (5.3.6 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing slightly perished (5.2.3 (d) (ii))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing slightly perished (5.2.3 (d) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive shock absorber mount (5.3.6 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing slightly perished (5.2.3 (d) (ii))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing slightly perished (5.2.3 (d) (ii))

Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Fuel cap/sealing device ineffective (6.1.3 (b) (i))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt Spring cone dust cover. (5.3.4 (b) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt Spring cone joint cover. (5.3.4 (b) (ii))

Rear fog lamp missing (4.5.1 (a) (ii))

Electrical wiring likely to drag on the ground Positive lead not secured. (4.11 (a) (iii)) DANGEROUS

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength Valance (5.3.6 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Rear Passenger's seat backrest cannot be secured in the upright position. (6.2.6 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

rear subframe rusty

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front subframe front bushes/attachment wearing

rust & welded patches

slight bind front wheels

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Headlamp aim not tested (1.8.A.1c)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

slight bind front wheels

front subframe front bushes/attachment wearing

rust & welded patches

coolant leak

rust & welded patches

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Headlamp aim not tested (1.8.A.1c)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

coolant leak

rust & welded patches

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)