2004 Mazda Bongo

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger holed (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end cap (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill corroded (5.3.6 (a) (i))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Inner Nail in tyre ()

oil leak

under side of vehicle corroded

underside of vehicle undersealed

Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security crossmember (6.2.2 (d) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shock mount (5.3.6 (a) (i))

Nearside Rear Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Front fog lamp inop

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Electrical wiring insecure and connectors likely to become disconnected wires by pedal box (4.11 (a) (ii))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member (5.3.6 (a) (i))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member (5.3.6 (a) (i))

Offside Headlamp lens seriously defective (4.1.1 (b) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Spare wheel insecure in carrier (6.1.5 (b) (i))

Electrical wiring inadequately secured battery cable to second battery (4.11 (a) (i))

Electrical wiring inadequately secured wire from osr to front (4.11 (a) (i))

Nearside Front fog lamp inop

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear wheel bearing has slight play (2.6.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

oil leak

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

corrosion on n/s/f and o/s/f inner sill but not within 30cm of any mountings or components

front discs scored and worn

n/s/f tyre on legal limit

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leak

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Battery insecure (1.9.1)

Nearside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Battery insecure (1.9.1)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leak

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Battery insecure

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front brake disc slightly pitted (3.5.1h)

Horn not working (1.6.2a)

Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Shock absorber has slight external damage to the casing (2.7.2a)

Oil leak

Battery insecure

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Front brake disc slightly pitted (3.5.1h)

Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Shock absorber has slight external damage to the casing (2.7.2a)

Oil leak

Horn not working (1.6.2a)

Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Inner Front Body has slight corrosion (6.1.B.2)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS