1996 Yamaha YZF600

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Suspension component pin or bush likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust silencer slightly loose (8.1.1 (b) (i))

Shock absorber has slight external damage to the casing (5.3.2 (b))

Rear Brake disc(s) slightly worn (3.2.A1l)

repair in rear tyre

Offside Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Exhaust mounting deteriorated. (7.1.1.c)

Rear Brake disc(s) slightly scored (3.2.A1l)

Front wheel bearings are excessively rough (2.3.5b)

Silencer Joint not secure

Front Hydraulic brake control feels spongy (3.1.4a)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Silencer Joint not secure

Front wheel bearings are excessively rough (2.3.5b)

Headlamp aim too low (1.6)

Exhaust excessively deteriorated (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Nearside Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Offside Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Offside Handlebar deformed (2.1.1b)

Rear Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Brake disc(s) has slight run out (3.2.A1m)

Tyre worn close to the legal limit (4.1.3(ii))