1995 Mazda MPV

Brake pipe corroded, covered in grease or other material All pipes (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Underbody heavily undersealed

Offside Rear Rear fog lamp insecure (4.5.1 (c) (i))

Rear inner valance area corroded in several places

Front Inner radiator mount not ideal

Nearside Rear Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Front Inner radiator mount not ideal

Nearside Rear Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

near side diff seal worn

Central Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member (6.1.1 (c) (i))

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Power steering inoperative and steering adversely affected (2.1.5 (c) (ii)) DANGEROUS

Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear wheel arch corroded

Parking brake lever has little reserve travel (3.1.6b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Seat belt stitching badly frayed (5.2.2b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Parking brake lever has no reserve travel (3.1.6b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear fog lamp tell tale not working (1.3.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

corrosion in offside inner under sill not within 30cm of mounting point

corrosion in offside outer sill at front not within 30 cm of mounting point

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Rear Rear fog lamp not working (1.3.2b)

corrosion in offside inner under sill not within 30cm of mounting point

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

nearside mirror lens missing

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Body has a sharp edge caused by damage (6.1.C.1)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

nearside mirror lens missing

both front tyres heavily scuffed on outer side walls

nearside front tyre bald on outer edge on raised platform section of tread

Front registration plate insecure (6.3.1b)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Body has a projection caused by corrosion (6.1.C.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Body has a projection caused by corrosion (6.1.C.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

both front tyres heavily scuffed on outer side walls

nearside front tyre bald on outer edge on raised platform section of tread

Rear Tyre worn close to the legal limit (4.1.E.1)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Headlamp aim too high (1.8)

Rear Rear fog lamp not working (1.3.2b)

Rear Tyre worn close to the legal limit (4.1.E.1)

Power steering component(s) has slight seepage from a component (2.3.3b)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)