1996 Mazda Bongo

DATE OF REG 08/02/1996

Rear Passenger seat(s) missing at time of test ()

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Seat belt missing (7.1.2 (a))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill - Front & Centre (6.1.1 (c) (i))

Nearside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Nearside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill - Front & Centre (6.1.1 (c) (i))

Nearside Rear Stop lamp(s) lens defective which has no effect on emitted light (4.3.1 (b) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 2.0 mm (5.2.3 (e))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner /outer sill (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge 2.0 mm (5.2.3 (e))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Nearside Front Brake hose damaged and likely to fail (1.1.12 (a)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Passenger seat(s) missing at time of test rear ()

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

underside of vehicle has surface rust

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Outer Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Outer Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Outer Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Outer Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

nearside and offside inner sills front to rear and rear chassis rails are corroding but at the time of test was not excessive enough to fail

Offside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)