2003 Mazda Bongo

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis leg (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis leg (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (i))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Rear Lower Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Towbar excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp tell-tale not working (4.9.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Coolant leak ()

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear chassis rail corroded

Offside Rear lamp unit damaged

Rear valance corroded

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Driver's seat insecure (6.2.A.1)

Offside Rear chassis rail corroded

Offside Rear lamp unit damaged

Rear valance corroded

Corrosion in various places underside

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt lower ball joint (2.4.G.2)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt lower ball joint (2.4.G.2)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Headlamp not working on main beam (1.7.5a)

Corrosion in various places underside

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt lower ball joint (2.4.G.2)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt lower ball joint (2.4.G.2)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

heavy surface corrosion to o.s.rear of vehicle

minor brake bind o.s.f

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Offside Rear fog lamp not working (1.3.2b)

Nearside Front Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)

heavy surface corrosion to o.s.rear of vehicle

minor brake bind o.s.f

front tyres bald inner edges

rear chassis corroded

rear discs corroded

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front front brake binding (3.7.B.1)

Offside Rear Rear fog lamp not working (1.3.2b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

front tyres bald inner edges

rear chassis corroded

rear discs corroded

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) DANGEROUS

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) DANGEROUS

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Rear fog lamp not working (1.3.2b)

Nearside Inner Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Outer Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear brake disc slightly scored (3.5.1h)

Offside Outer Rear Body has slight corrosion (6.1.B.2)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Exhaust has a minor leak of exhaust gases (7.1.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)