1996 Suzuki GN125

Nearside Rear Direction indicator insecure (4.4.1 (c) (i))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Rear Position lamp incorrect colour faded (4.2.3 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Tyre worn close to the legal limit slightly perished (5.2.3 (e))

Drive chain slightly loose (6.1.7 (c) (i))

Front tyre slightly perished

Rear Footrest missing (6.2.1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Rear Footrest missing (6.2.1a)

centre stand pivot worn

Drive chain worn to excess (6.2.1e)

Front shock absorber seal failed and leaking oil (2.3.3)

Rear Drive chain sprocket worn to excess (6.2.1e)

centre stand pivot worn

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear position lamp deteriorated but function not impaired (1.1.1b)

Steering headbearing has slight free play (2.2.2)

gear lever slightly loose

main stand pivot worn

Drive chain slightly tight (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear suspension component excessively corroded. (2.4.A.1a)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Handlebar deformed (2.1.1b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Exhaust is leaking and excessively noisey (7.1.1b)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)