1995 Rover Mini

slight oil leak

slight play both front upper ball joints

slight rear underside surface corrosion

Fluid leak, but not excessive Coolant (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Slight corrosion to rear subframe

All direction indicators not working (4.4.1 (a) (ii))

Fluid leak, but not excessive Coolant (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Slight corrosion to rear subframe

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Slight surface corrosion to rear subframe.

Nearside Headlamp does not operate immediately when selected on dipped beam (1.7.4a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Slight surface corrosion to rear subframe.

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Suspension arm has slight play in a ball joint both (2.4.G.2)

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has slight play in a ball joint both (2.4.G.2)

Subframe mounting prescribed area is corroded but not considered excessive both front floor area's (2.4.A.3)

Subframe mounting prescribed area is corroded but not considered excessive both rear floor drain holes (2.4.A.3)

brake servo assistance low

oil leak

various underside suspension bushes perished.

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

floor area corroded

Stop lamp not working (1.2.1b)

Driver's seat cannot be secured in the upright position. (6.2.A.2)

Offside Steering rack gaiter split (2.2.D.2d)

Oil leak

floor area corroded

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

floor area corroded

rear number plate deteriorated

Hazard warning lamps inoperative (1.4.B.1b)

Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)

Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)

Nearside Front position lamp(s) not working (1.1.A.3b)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

floor area corroded

rear number plate deteriorated

Appears to be slight wear and movement starting at front top and bottom ball joints (esp bottoms)

Exhaust corroded

Front floor corner areas getting corroded

N/S and O/S front Inner w/arch areas around door hinge mounts getting corroded (esp lower mounts)

N/S/F tyre low on tread and nearing limits

O/S/F tyre low on tread at inner tread edge area

O/S/R Inner w/arch top area getting corroded

Outer sills getting corroded

P/Brake cables getting abit corroded

Slight wear and movement starting at N/S/R radius arm bush

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Sub-frame attachment bracket/mounting insecure (2.4.G.1)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp aim too low (1.8)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Appears to be slight wear and movement starting at front top and bottom ball joints (esp bottoms)

Exhaust corroded

Front floor corner areas getting corroded

N/S and O/S front Inner w/arch areas around door hinge mounts getting corroded (esp lower mounts)

N/S/F tyre low on tread and nearing limits

O/S/F tyre low on tread at inner tread edge area

O/S/R Inner w/arch top area getting corroded

Outer sills getting corroded

P/Brake cables getting abit corroded

Slight wear and movement starting at N/S/R radius arm bush

Front brakes are out of ballance.

Front inner arches are rusty under repair.

Front tyres are worn at inner edeges.

Noted nearside rear wheel is different to rest.

Park brake cable is rusty.

Park brake is low.

Rear inner sill ends are rusty

Rear sub frame is rusty

Sills are generaly rusty.

Rear fog lamp not working (1.3.2b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear inner sill ends are rusty

Rear sub frame is rusty

Sills are generaly rusty.

Front brakes are out of ballance.

Front inner arches are rusty under repair.

Front tyres are worn at inner edeges.

Noted nearside rear wheel is different to rest.

Park brake cable is rusty.

Bonnett difficult to open.

Doors show rust at lower ends.

Front and rear jack points are rusty,

Front brakes are out of ballance.

Front inner arches are rusty,

Fuel cap is stiff.

Patk brake cables are rusty,

Rear number plate is poor.

Rear panel is rusty.

Rear side lamps are dim.

Rear sub frame is rusty.

Reduced performance at offside park brakes,

Sills are rusty,

Slight play at nearside lower swivel.

Exhaust has a major leak of exhaust gases (7.1.2)

Bonnett difficult to open.

Doors show rust at lower ends.

Front and rear jack points are rusty,

Front brakes are out of ballance.

Front inner arches are rusty,

Fuel cap is stiff.

Patk brake cables are rusty,

Rear number plate is poor.

Rear panel is rusty.

Rear side lamps are dim.

Rear sub frame is rusty.

Reduced performance at offside park brakes,

Sills are rusty,

Slight play at nearside lower swivel.

Nearside Front Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front Headlamp aim too high (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front registration plate deteriorated (6.3.1d)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

CORROSION FORMING ON N/S/F AND OSF INNER WHEEL ARCHES

CORROSION FORMING ON N/S/F FLOOR PAN

SLIGHT PLAY IN REAR RADIUS ARMS

Front Windscreen wiper blade deteriorated (8.2.2)

Fuel cap/sealing device does not fasten securely by positive means (7.2.4b)

Nearside Front Headlamp aim too low (1.8)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Headlamp aim too low (1.8)

Offside Inner Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)