1995 Fiat Ducato

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

both front discs slightly worn

vehicle heavily undersealed

Exhaust system insecure 5 X rubber mounts (6.1.2 (a))

Front Upper Outline marker lamp not working Both NS & OS (4.2.1 (a) (ii))

Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Both NS & OS chassis legs rotten and holed near lower radiator support (6.1.1 (c) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner step area holed (6.2.2 (d) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Front Brake hose excessively stretched also chaffing (1.1.12 (b) (ii))

Offside Front Engine mounting damaged or deteriorated resulting in excessive movement rotten (6.1.8 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis rear of subframe mount area (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch from enginebay holed within suspension and engine mounts (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch holed in 2 X places (5.3.6 (a) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Exhaust mounting defective 2 X rubber mounts (6.1.2 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced Both NS & OS inner and outer steps/sills (6.1.1 (c) (i))

Front Lower Suspension arm corroded but not seriously weakened Both NS & OS (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive Both NS & OS chassis rear of subframe area (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Brake hose slightly deteriorated Both NS & OS and ferrals corroded (1.1.12 (b) (ii))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair Both NS & OS slightly grabbing/binding (1.2.1 (c))

Rear Tyre slightly damaged/cracking or perishing Both NS & OS cracking (5.2.3 (d) (ii))

battery tray heavily corroded and weak

exhaust system corroded

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Rear All direction indicators not working (4.4.1 (a) (ii))

Offside Rear Upper Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear wheel bearing has slight play (2.6.2)

floor pan / chassis area slightly corroded and undersealed

Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded inner and outer sills (5.2.6)

Nearside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Nearside Rear Direction indicator not working (1.4.A.2c)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Lower Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

offside and nearside front chassis and x member corroded not within 30 cm of mounting point at time of test

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear wheel bearing has slight play (2.6.2)

Battery insecure (1.9.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Front constant velocity joint is insecure (2.5.C.1b)

Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded (3.1.9)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear wheel bearing has slight play (2.6.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

bare wires under bonnet

front axle heavily corroded plus suspension arms

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Side repeater not working (1.4.A.2c)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Front wheel bearing has excessive play (2.5.A.3c)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

bare wires under bonnet

front axle heavily corroded plus suspension arms

Headlamp masks/converters fitted

numerous areas of corrosion to chassis and suspension components

tail board lights inop

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear fog lamp not working (1.3.2b)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Windscreen washer provides insufficient washer liquid (8.2.3)

Headlamp masks/converters fitted

numerous areas of corrosion to chassis and suspension components

tail board lights inop

Exhaust has part of the system excessively deteriorated (7.1.1a)

Exhaust system not adequately supported (7.1.1)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Parking brake lever has no reserve travel (3.1.6b)

Centre Exhaust has part of the system excessively deteriorated (7.1.1a)

Front brake disc excessively scored (3.5.1h)

Front registration plate deteriorated (6.3.1d)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Headlamp aim too high (1.8)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear wheel bearing has excessive play (2.6.2)

Nearside Upper Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Front brake disc slightly pitted (3.5.1h)

Nearside Rear wheel bearing has slight play (2.6.2)

Oil leak

Nearside Front Brake hose excessively chafed (3.6.B.4d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Oil leak

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

WATER TANK MOUNTING CORODED