MOT Status
ExpiredMileage
76,634 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Inner Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Outer Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Bonnet cannot be secured in the closed position (8.4.1)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front brake disc excessively pitted (3.5.1h)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front brake disc excessively pitted (3.5.1h)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
rear brake application uneven (3.7.B.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
refer to previous VT32
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
How Reliable is the Mazda 121?
Based on 50,730 MOT tests across 6,017 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N614 PFH is a 1996 Mazda 121 in Red with a 1,299cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 54.5%.
Across all 1996 Mazda 121 models, the average MOT pass rate is 60.8% with a typical mileage of 57,937 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 121 fails its MOT is brake pipe excessively corroded, accounting for 4,459 recorded failures. If you're considering buying N614 PFH, it's worth having these areas checked by a mechanic before committing.
The Mazda 121 typically stays on UK roads for around 38 years. At 30 years old, this Mazda 121 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of N614 PFH?
You can check the full history of N614 PFH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N614 PFH registered?
N614 PFH is a 1996 Mazda 121, first registered on 24 May 1996.
Is N614 PFH safe to buy?
The MOT history for N614 PFH shows 11 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N614 PFH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N614 PFH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.