MOT Status
ExpiredMileage
207,286 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Coolant leak pipe leaking ()
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Coolant leak pipe leaking ()
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Rear Coil spring corroded both (5.3.1 (b) (i))
near side inner sill corroded
off side rear inner wheel arch valance corroded
Nearside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Rear Coil spring corroded both (5.3.1 (b) (i))
near side inner sill corroded
off side rear inner wheel arch valance corroded
Rear Stop lamp(s) all not working (4.3.1 (a) (iii))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Rear Rear fog lamp missing (4.5.1 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
off side rear inner bumper sill corroded
Rear brake discs are rusty
Front Outer Drive shaft joint constant velocity boot severely deteriorated both are perished (6.1.7 (g) (i))
Offside Rear lamp unit damaged
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
engine covers and under trays fitted obscuring some components
Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt both (2.5.C.1a)
Offside Rear Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)
offside rear chassis corrodeing
rear brake discs corroded
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear fog lamp not working (1.3.2b)
Offside Front Outer Brake pad(s) insecure lining de bonded (3.5.1g) DANGEROUS
215/65/15/100h budget
Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt both (2.5.C.1a)
Offside Rear Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)
front brake discs corroded on inner surfaces
nearside front tyre valve perishing
offside rear chassis corrodeing
rear brake discs corroded
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Outer sill beginning to corrode.
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Nearside Rear Outer sill beginning to corrode.
Offside Rear Direction indicator incorrect colour (1.4.A.2f)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt bottom swivel (2.2.C.1c)
Nearside Front Lower Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Upper Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt bottom swivel (2.2.C.1c)
Offside Front Lower Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Upper Tie bar/rod ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill area (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill area (2.4.A.3)
Offside Rear fog lamp not working (1.3.2b)
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive sill area and middle area (2.4.A.3)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
both rear tyres cracked on tread and outer walls
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N625 FKK is a 2007 Mazda Bongo in Black with a 2,490cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 70.8%.
Across all 2007 Mazda Bongo models, the average MOT pass rate is 66.1% with a typical mileage of 134,152 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying N625 FKK, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 19 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of N625 FKK?
You can check the full history of N625 FKK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N625 FKK registered?
N625 FKK is a 2007 Mazda Bongo, first registered on 24 October 2007.
Is N625 FKK safe to buy?
The MOT history for N625 FKK shows 24 tests with a 70.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N625 FKK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N625 FKK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.