1995 Mazda Bongo

Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch (6.1.1 (c) (i))

Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage has an unsafe modification (5.3.3 (c) (i))

Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d bush (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement d bush (2.4.G.2)

Offside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.C.1b)

Vehicle structure excessively corroded within 30cm of towbar mounting rear crossmember (6.6.6)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded rear inner wheel arch (5.2.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded rear inner wheel arch (5.2.6)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

offside front inner c/v boot split

corrosion in offside rear outer wheel arch

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear fog lamp switch missing (1.3.1a)

corrosion in offside rear outer wheel arch

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Registration plate lamp not working (1.1.5c)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Registration plate lamp not working (1.1.5c)