MOT Status
ExpiredMileage
223,300 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Suspension component mounting repair covered in underseal both sides inner sills (5.3.6 (a) (i))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)
Nearside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Oil leak ()
Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement bottom arm bush to rear of car (2.4.G.2)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement link (2.4.G.2)
Offside Front Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement bottom arm bush to rear of car (2.4.G.2)
Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement link (2.4.G.2)
Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement bottom arm bush to rear of car (2.4.G.2)
Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement link (2.4.G.2)
Offside Front Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement bottom arm bush to rear of car (2.4.G.2)
Offside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement link (2.4.G.2)
Rear Registration plate lamp not working (1.1.C.1d)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
front crossmember slightly corroded
n/s/f inner sill slightly corroded
o/s inner sill and floor slightly corroded
o/s/f inner wheel arch slightly corroded
outer sills slightly corroded
rear crossmember slightly corroded
rear inner wheel arches slightly corroded
Offside Battery insecure (1.9.1)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Offside Rear fog lamp insecure (1.3.2a)
Offside Rear fog lamp not working (1.3.2b)
Rear fog lamp tell tale not working (1.3.1b)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
front crossmember slightly corroded
n/s/f inner sill slightly corroded
o/s inner sill and floor slightly corroded
o/s/f inner wheel arch slightly corroded
outer sills slightly corroded
rear crossmember slightly corroded
rear inner wheel arches slightly corroded
Front Brake pad(s) wearing thin (3.5.1g)
Battery insecure
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Oil leak
Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
knock nsf
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Seat belt damaged sufficient to significantly weakened the webbing (5.2.2a)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear fog lamp tell tale not working (1.3.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
knock nsf
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
N708 ENE is a 1996 Mazda Bongo in White with a 2,500cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 66.7%.
Across all 1996 Mazda Bongo models, the average MOT pass rate is 65.9% with a typical mileage of 133,482 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying N708 ENE, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 30 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of N708 ENE?
You can check the full history of N708 ENE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was N708 ENE registered?
N708 ENE is a 1996 Mazda Bongo, first registered on 31 December 1996.
Is N708 ENE safe to buy?
The MOT history for N708 ENE shows 24 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does N708 ENE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on N708 ENE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.