1995 Mazda Bongo

Vehicle structure is corroded but structural rigidity is not significantly reduced In chassis and general bodywork (6.1.1 (c) (i))

Fuel system component leaking Around fuel pump area (6.1.3 (b) (i))

Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Rear Exhaust has a major leak of exhaust gases Silencer (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced General corrosion (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis by coil spring (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Outrigger (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis by coil spring mount (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases Silencer (6.1.2 (a))

Corrosion in the front crossmember

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Crossmember (6.6.6)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting Crossmember (6.6.6)

Corrosion in front crossmember

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

fresh underseal cannot check

front crossmember very rusty

Central Rear Vehicle structure excessively corroded within 30cm of towbar mounting holed by towbar mount (6.6.6)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Suspension component mounting prescribed area is excessively corroded sill end holed (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill is coming away from outer and is holed also appears to have woodscrew holding top edge of plate (2.4.A.3)

Front Body has slight corrosion cross member corroded and holed in several places (6.1.B.2)

Front Tyre worn close to the legal limit both sides worn on inner edges (4.1.E.1)

Nearside Body has slight corrosion inner and outer sill holed and front and corroded inner and outer (6.1.B.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Body has slight corrosion inner sill holed front and middle (6.1.B.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive both rear chassis legs corroded by shock absorbers (2.4.A.3)

Rear Trailer electrical socket damaged, but the lead can still be securely connected (1.9.3b)

Rear Vehicle structure slightly corroded within 30cm of towbar mounting corroded by various towbar mounts (6.6.6)

unable to fully assess underside for corrosion due to heavy application of seam sealer and body schultz

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Body has slight corrosion (6.1.B.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Upper Power steering component(s) has slight seepage from a component (2.3.3b)

offside inner sill holed and corroded / not within 30 cm of load bearing point

rear valance holed and corroded / not within 30 cm of load bearing point

Emissions not tested (7.0)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear fog lamp not working (1.3.2b)

Offside Stop lamp not working (1.2.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear fog lamp switch missing (1.3.1a)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Upper Power steering component(s) has slight seepage from a component (2.3.3b)

offside inner sill holed and corroded / not within 30 cm of load bearing point

rear valance holed and corroded / not within 30 cm of load bearing point

Power steering component(s) has slight seepage from a component (2.3.3b)

corrosion in rear crossmember and os inner sill

Headlamp aim too high (1.8)

Offside Brake cable has restricted free movement (3.5.1k)

Offside rear brake recording little or no effort (3.7.B.5a)

Rear fog lamp missing (1.3.2a)

Battery insecure

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

offside rear tyre perished

rear wheel arches are rusty

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Battery insecure

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Headlamp aim too high (1.8)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

offside rear tyre perished

rear wheel arches are rusty

Nearside Front brake disc slightly pitted (3.5.1h)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Power steering component(s) has slight seepage from a component (2.3.3b)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front brake disc slightly pitted (3.5.1h)

Nearside Headlamp aim too low (1.8)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Headlamp aim too low (1.8)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Power steering component(s) has slight seepage from a component (2.3.3b)

Nearside Front brake disc slightly pitted (3.5.1h)

Nearside Rear Body has slight corrosion (6.1.B.2)

Offside Front brake disc slightly pitted (3.5.1h)

Offside Rear Body has slight corrosion (6.1.B.2)

n/s/f & o/s/f tyres wearing on inner edges

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)