2005 Mazda Bongo

Nearside Front Service brake lagging in operation (1.2.1 (d))

Nearside Rear Bumper insecure (6.1.4 (a) (i))

Nearside Rear Integral body structure inadequately repaired such that structural rigidity is significantly reduced cill holed and filled with foam and covered with something thats not metal (6.1.1 (d) (i))

Offside Rear Outer Integral body structure inadequately repaired such that structural rigidity is significantly reduced cill holed and filled with foam and covered with something thats not metal (6.1.1 (d) (i))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Position lamp insecure (4.2.1 (c) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive near shock mounting area (5.3.6 (a) (i))

Oil leak, but not excessive engine area (8.4.1 (a) (i))

under vehicle corrosion front to back

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front corrosion to inner/outer sill

Nearside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Nearside Rear Standard fitment seat belt missing ()

Offside Front corrosion to inner/outer sill

Offside Rear Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Offside Rear Standard fitment seat belt missing ()

Offside Rear expanding foam/filler repair

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Standard fitment seat belt missing ()

Nearside corrosion hole outer sill (central)

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive top strut mounting (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge wearing inner edge and perished (5.2.3 (e))

Offside Rear Standard fitment seat belt missing ()

Offside Rear Upper Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock absorber mount (5.3.6 (a) (i))

Offside Rear corrosion hole outer sill

Offside Rear sings of filler/foam repair inner arch

Offside corrosion hole inner sill (central)

Nearside Rear Seat belt buckle missing (7.1.2 (d))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Seat belt buckle missing (7.1.2 (d))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Lower Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside corrosion hole outer sill (central)

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive top strut mounting (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge wearing inner edge and perished (5.2.3 (e))

Offside Rear Upper Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive shock absorber mount (5.3.6 (a) (i))

Offside Rear corrosion hole outer sill

Offside Rear sings of filler/foam repair inner arch

Offside corrosion hole inner sill (central)

Nearside Front inner sill has a corrosion hole

Nearside Rear inner wheel arch/sill corroded

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front inner sill has a corrosion hole

Vehicle structure is corroded but structural rigidity is not significantly reduced Rear crossmember/bumper support has corrosion holes on both sides (6.1.1 (c) (i))

Offside Rear Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS

Nearside Front inner sill has a corrosion hole

Nearside Rear inner wheel arch/sill corroded

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front inner sill has a corrosion hole

Vehicle structure is corroded but structural rigidity is not significantly reduced Rear crossmember/bumper support has corrosion holes on both sides (6.1.1 (c) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Rear Anti-roll bar attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced both front inner sills have corrosion holes (6.1.1 (c) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect headlamp clouded (4.1.2 (c))

Nearside Rear Upper Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect headlamp clouded (4.1.2 (c))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced both front inner sills have corrosion holes (6.1.1 (c) (i))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Anti-roll bar attachment bracket/mounting missing (5.3.3 (a) (ii)) DANGEROUS

Nearside front indicator lense damaged, sharp edge

Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Cross member (5.3.6 (a) (i))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced Sill panel (7.1.1 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Rear Anti-roll bar attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS

Nearside front indicator lense damaged, sharp edge

Body has slight corrosion under body (6.1.B.2)

Upper Body has slight corrosion (6.1.B.2)

exhaust deteriorated and small leak

Front Lower crossmember materialy weakend

Power steering component(s) has slight seepage from a seal (2.3.3b)

Rear Brake pad(s) wearing thin (3.5.1g)

corrosion on o/s and n /s rear brake back plate nuts

deterioration on both head lamp lens

deterioration on centre exhaust

deterioration on rear brake disc

rear fog lamp lens damaged

slight corrosion on o/s front top suspension mount

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Exhaust has a major leak of exhaust gases centre (7.1.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside front brake binding (3.7.B.1)

Offside deterioration on o/s front wiper blade

Power steering component(s) has slight seepage from a seal (2.3.3b)

Rear Brake pad(s) wearing thin (3.5.1g)

corrosion on o/s and n /s rear brake back plate nuts

deterioration on both head lamp lens

deterioration on rear brake disc

rear fog lamp lens damaged

slight corrosion on o/s front top suspension mount

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

deterioration on centre exhaust

deterioration on rear brake disc

rear fog lamp lens damaged

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside front brake binding (3.7.B.1)

Offside Rear Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside front brake binding (3.7.B.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

deterioration on centre exhaust

deterioration on rear brake disc

rear fog lamp lens damaged

wear in rear anti roll bar centre bushes also in drop link bushes

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Stop lamp not working (1.2.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear fog lamp emits a light other than red (1.3.2e)

Upper Stop lamp not working (1.2.1b)

wear in rear anti roll bar centre bushes also in drop link bushes

Offside front brake binding (3.7.B.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Stop lamp not working (1.2.1b)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Vehicle structure has slight corrosion (6.1.A.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Front brake disc excessively pitted (3.5.1h)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Vehicle structure has slight corrosion (6.1.A.1)

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Windscreen wiper blade deteriorated (8.2.2)

Rear Rear fog lamp not working (1.3.2b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Horn not working (1.6.2a)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)